Share on facebook
Share on linkedin
Touch Lamp Axial Preset Gauge
Product Description
Check height of unit with a gauge block and dial indicator. Turn allen screw if adjustment is needed. Do not use calipers for presetting unit, only use gauge block. Move the cutting tool tip towards the sensor button until the lights turns on, reverse direction until light turns off. When presetting diameter, rotate tool slowly for higher precision.
| Part No. | Description | A | B | C |
|---|---|---|---|---|
| 07905-2 | ZOP-50 Gauge | 56mm | 2" | 13.5mm |
Watch TTG on YOUTUBE
Save On Techniks Tooling Packages
