CAT Milling Chucks

  • Grips shank up to 5x tighter than ER 40 collet chucks

  • Special slotted design of bore I.D. increases holding power and reduces vibration.

  • CoolBLAST coolant-thru standard on all milling chucks

Product Description

Techniks CAT Milling Chucks provide up to 5X the gripping force of other manufacturer’s ER40 holders to meet the most demanding, high material removal rate applications such as heavy milling of titanium or other high-temp alloys. A machined bearing cage and high precision, individually matched needle bearings symmetrically placed provide smooth, reliable operation. All Techniks Milling Chucks are designed with CoolBLAST coolant grooves in the I.D. bore to direct coolant to the cutting area and assist with chip evacuation. Reduction sleeves can be used to hold almost any shank diameter

No content found
Part No.Descriptionl1l2d1d22D3D
23202GCAT40 x MLD 3/4" - 4"4"2.38"3/4"2.24" 23202G.dwg 23202G.step
23203GCAT40 x MLD 3/4" - 6"6"2.38"3/4"2.24" 23203G.dwg 23203G.step
23204GCAT40 x MLD 1" - 4"4"2.23"1"2.36" 23204G.dwg 23204G.step
23210GCAT40 x MLD 1-1/4" - 4.2"4.2"2.38"1-1/4"2.8" 23210G.dwg 23210G.step
Part No.Descriptionl1l2d1d22D3D
23214GCAT50 x MLD 3/4" - 4"4"2.38"3/4"2.24" 23214G.dwg 23214G.step
23218GCAT50 x MLD 1" - 4"4"2.23"1"2.36" 23218G.dwg 23218G.step
23222GCAT50 x MLD 1-1/4" - 4.13"4.13"2.38"1-1/4"2.8" 23222G.dwg 23222G.step
23224GCAT50 x MLD 1-1/4" - 6"6"2.38"1-1/4"2.8" 23224G.dwg 23224G.step
No content found

Contact Us Today!