Share on facebook
Share on linkedin

CAT40 EM Holders – Stubby

  • H5 bore tolerance for improved concentricity and tool life

  • Taper ground to AT3 specification for maximum spindle contact

  • CoolBLAST and CoolFLEX coolant options

Product Description

CAT40 Stubby End Mill Holders are manufactured to meet or exceed the H5 specification. H5 is an extremely accurate bore I.D. and provides improved T.I.R. for extended cutting tool life. When machining in tight areas make sure to try our Rigid Reach End Mill holders. It’s tapered design  make its body more rigid, which is extremely important when milling at extended lengths. For dual contact spindles, Techniks DualDRIVE end mill holders provide increased rigidity and accuracy during heavy side loads.

Part No.Descriptionl1d1d22D3D
22907-1.75CAT40 x SLN 1/8" - 1.75"1.75"1/8".75" 22907-1.75.dwg 22907-1.75.step
22909-1.75CAT40 x SLN 3/16" - 1.75"1.75"3/16".79" 22909-1.75.dwg 22909-1.75.step
22911-1.75CAT40 x SLN 1/4" - 1.75"1.75"1/4".79" 22911-1.75.dwg 22911-1.75.step
22913-1.75CAT40 x SLN 5/16" - 1.75"1.75"5/16".88" 22913-1.75.dwg 22913-1.75.step
22915-1.75CAT40 x SLN 3/8" - 1.75"1.75"3/8".88" 22915-1.75.dwg 22915-1.75.step
22916-1.75CAT40 x SLN 7/16" - 1.75"1.75"7/16"1.12" 22916-1.75.dwg 22916-1.75.step
22917-1.75CAT40 x SLN 1/2" - 1.75"1.75"1/2"1.5" 22917-1.75.dwg 22917-1.75.step
22919-1.75CAT40 x SLN 5/8" - 1.75" 1.75"5/8"1.5" 22919-1.75.dwg 22919-1.75.step
22921-1.75CAT40 x SLN 3/4" - 1.75" 1.75"3/4"1.75" 22921-1.75.dwg 22921-1.75.step
22925A-1.75CAT40 x SLN 1" - 1.75" 1.75"1"2" 22925A-1.75.dwg 22925A-1.75.step
22927A-2CAT40 x SLN 1-1/4" - 2" 2"1-1/4"2.5" 22927A-2.dwg 22927A-2.step
SKU 22907-1.75 22909-1.75 22911-1.75 22913-1.75 22915-1.75 22916-1.75 22917-1.75 22919-1.75 22921-1.75 22925A-1.75 22927A-2 Categories , , Tags , , , ,

Contact Us Today!