CAT DualDRIVE Milling Chucks

  • Grips shank up to 5x tighter than ER 40 collet chucks

  • Special slotted design of bore I.D. increases holding power and reduces vibration.

  • CoolBLAST coolant-thru standard on all milling chucks

Product Description

Techniks CAT DualDRIVE Milling Chucks are the perfect holders for dual-contat spindles, providing up to 5X the gripping force of other manufacturer’s ER40 holders to meet the most demanding, high material removal rate applications such as heavy milling of titanium or other high-temp alloys. A machined bearing cage and high precision, individually matched needle bearings symmetrically placed provide smooth, reliable operation. All Techniks Milling Chucks are designed with CoolBLAST coolant grooves in the I.D. bore to direct coolant to the cutting area and assist with chip evacuation. Reduction sleeves can be used to hold almost any shank diameter

Part No.Descriptionl1l2d1d22D3D
43.463G.64.400SCAT40 x MLD 3/4" - 4" DualDRIVE4"2.38"3/4"2.24" 43.463G.64.400.dwg 43.463G.64.400.step
43.463G.68.400SCAT40 x MLD 1" - 4" DualDRIVE4"2.23"1"2.36" 43.463G.68.400.dwg 43.463G.68.400.step
43.463G.72.420SCAT40 x MLD 1-1/4" - 4.2" DualDRIVE4.2"2.38"1-1/4"2.8" 43.463G.72.420.dwg 43.463G.72.420.step
Part No.Descriptionl1l2d1d22D3D
44.463G.64.400SCAT50 x MLD 3/4" - 4" DualDRIVE4"2.38"3/4"2.24" 44.463G.64.400.dwg 44.463G.64.400.step
44.463G.64.600SCAT 50 x MLD 3/4" - 6" DualDRIVE6"2.38"3/4"2.24" 44.463G.64.600.dwg 44.463G.64.600.step
44.463G.64.800SCAT 50 x MLD 3/4" - 8" DualDRIVE8"2.38"3/4"2.24" 44.463G.64.800.dwg 44.463G.64.800.step
44.463G.68.400SCAT50 x MLD 1" - 4" DualDrive4"2.23"1"2.36" 44.463G.68.400.dwg 44.463G.68.400.step
44.463G.72.413SCAT50 x MLD 1-1/4" - 4.13" DualDRIVE4.13"2.38"1-1/4"2.8" 44.463G.72.413.dwg 44.463G.72.413.step
44.463G.72.600SCAT 50 x MLD 1-1/4" - 6" DualDRIVE6"2.38"1-1/4"2.8" 44.463G.72.600.dwg 44.463G.72.600.step
44.463G.72.800SCAT 50 x MLD 1-1/4" - 8" DualDRIVE8"2.38"1-1/4"2.8" 44.463G.72.800.dwg 44.463G.72.800.step

Contact Us Today!