MagVISE ECB Products

4 sizes available to fit your application needs. Each ECB vise includes 2 machinable induction blocks, wrench, extension and socket, switch-connect socket assembly, 2 stop plates, 4 toe clamps.
ECB magnetic vises easily integrate with pallet changing and tombstone systems used in production cells.
Get a quote fast!

Use induction blocks at all times to prevent damage to the face of the magnetic vise. You can easily modify induction blocks to adapt your setup to part requirements. Please note that the spring loaded induction blocks are NOT machineable, but the solid blocks are able to be drilled and machined as required.

After installing your ECB vise we recommend cleanup milling the surface of your induction blocks before loading your work piece to insure that the surface height is uniform and parallel to the spindle.

Induction blocks & work stops included

Switch-connect vises to activate all at once

end view

side view

top & bottom views
Part No. L x W x H A B Min. Stock Thickness Holding Power Weight
ECB-050 5" x 3" x 3" .47" .47" 0.4" 1,100 lbs. 15 lbs.
ECB-075 6.8" x 3" x 3" .47" .47" 0.4" 1,650 lbs. 19 lbs.
ECB-120 7.3" x 4.2" x 4.2" .62" .59" 0.6" 2,640 lbs. 40 lbs.
ECB-210 9.2" x 5.2" x 5.3" .65" .84" 0.8" 4,620 lbs. 80 lbs.


Part No. Description L x W x H
EEPM-SPF 1, soft fixed induction block, 8mm screw - use with ECB-SP50 spring blocks. 1.97” x 1.97” x 1.23”
EEPM-SP 2, spring loaded induction block, 8mm screw - use with ECB-SPF50 on corners. 1.89” x 1.89” x 1.41”