HSK F ER collet chuck tool holder for CNC machines

ER collet chucks handle a wide range of machining jobs without having to buy new tool holders. Simply choose the right size collet for the job, set tool depth, and tighten the collet nut to the proper torque using a torque wrench and tightening fixure.

Voted Best Collet Chuck on the Market!

• Balanced to 25,000 RPM at G2.5

• 0.0001" runout from taper to pocket

• Individual lab certification included

Techniks tool holders are manufactured to the highest possible standards to extend perishable cutting tool life and improve CNC machine performance.

Collets are available for: drilling, milling, coolant thru, and high-speed applications. Special “DNADead Nuts Accurate collets are used for small drills (6mm and smaller) to maintain T.I.R. at those sizes.

Use "Power Coat" nuts to increase the holding power and safety of your tool holders. High holding power extends cutting tool life and improves surface finish.

Refer to the chart below to order HSK F ER collet chuck tool holders.

HSK50F, HSK63F, ER Collet Chuck Tool Holders for CNC Routers

Part No. Description
D
A
F
N
Collet Nut
Wrench
170.05.008.004 HSK 50F x ER 32 - 80mm
50mm
80mm
26mm
50mm
46132
04616
171.05.008.001 HSK 63F x ER16 - 60mm
63mm
60mm
26mm
32mm
46116
04613
171.05.008.002 HSK 63F x ER16 - 100mm
63mm
100mm
26mm
32mm
46116
04613
30000 HSK 63F x ER32 - 70mm
63mm
70mm
26mm
50mm
46132
04616
30001 HSK 63F x ER40 - 75mm
63mm
75mm
26mm
63mm
46140
04617
30002 HSK 63F x ER40 - 90mm
63mm
90mm
26mm
63mm
46140
04617
3002-C-P HSK 63F x ER40 - 90mm w/Coolant Pipe 63mm 90mm 26mm 63mm 46140 04617
30003 HSK 63F x ER40 - 115mm
63mm
90mm
26mm
63mm
46140
04617
30005 HSK 63F x ER40 - 125mm
63mm
125mm
26mm
63mm
46140
04617
31025F HSK 63 F x SYOZ 25 - 80mm
63mm
80mm
26mm
60mm
03638
03691