Surplus Tooling at 50% Off!


Overstocks / Discontinued / One-of-a-Kinds – Get them while they last...
CAT40, CAT50, BT30, BT40, HSK63, HSK100, ISO30, SYOZ & More!
All are new items and backed by our 100% performance guarantee.

Order from your Distributor or call us to find your Distributor:
(800) 597-3921 or local (317) 803-8000
info@techniksusa.com

Offer limited to the part numbers listed below, while supplies last.

overstock toolholders


BT30 Tooling Description QTY. Regular  50% OFF 
77.05.071.750-W BT 30 Komo x Shrink Fit 3/4" - 3" without slots 5 $238.00 $119.00
77.05.071.375-W BT 30 Komo x Shrink Fit 3/8" - 3" without slots 9 $238.00 $119.00
77.05.071.625-W BT 30 Komo x Shrink Fit 5/8" - 3" without slots 10 $238.00 $119.00
68461 BT 30 x End Mill Holder 7/8" - 3.35" Dual Drive 2 $325.00 $162.50
17130-0.625-3 BT 30 x End Mill Holders 5/8" - 3" 2 $131.00 $65.50
FI-66103 BT 30 x ER 16 - 90mm w/ DDrive Holder 18 $280.00 $140.00
FI-66106-105 BT 30 x ER 20 - 105mm Holder w/DDrive 12 $294.00 $147.00
16106-50 BT 30 x ER 20 - 50mm collet chuck 1 $93.00 $46.50
FI-66106-90 BT 30 x ER 20 - 90mm Holder w/ DDrive 18 $287.00 $143.50
16121-L BT 30 x ER 32 - 60 with left h& collet chuck 3 $250.00 $125.00
16113-L BT 30 x ER 32 - 70 with left h& nut collet chuck 1 $225.00 $112.50
67.05.071.346 BT 30 x Shrink Fit .3462 ID 4 $350.00 $175.00
67.05.071.500-5 BT 30 x Shrink Fit 1/2" x 5" 1 $378.00 $189.00
67.05.071.562 BT 30 x Shrink Fit 9/16" x 3.15" 4 $406.00 $203.00
18862 BT 30 x Slim Fit series 20 - 80 collet Holder with wrench 2 $259.00 $129.50
FI-67130-0.1875-2.5 BT 30 x SLN 3/16" - 2.5"End Mill Holder w/ DDrive 30 $291.00 $145.50
16422 BT 30 x SPH 13mm - 130mm, high precision drill chuck 4 $372.00 $186.00
16056 BT 30 x TG 75 with slots collet chuck 1 $165.00 $82.50
BT40 Tooling Description QTY. Regular  50% OFF 
75547 BT 40 1/2" Toolholder for stone cutting industry CNC routers 93 $244.00 $122.00
75549 BT 40 3CM Holder Rev B with nut & retention knob 29 $241.50 $120.75
75551 BT 40 4CM Holder Rev B with nut & retention knob 10 $275.50 $137.75
51997 BT 40 6-7CM Holder Rev A with nut 31 $344.00 $172.00
32900/40BT BT 40 T/C Tap Holder #4 3 $966.00 $483.00
532-104 BT 40 x 1-1/4" - 4.14" Milling Chuck 1 $330.00 $165.00
532-098 BT 40 x 3/4" - 4.14" Milling Chuck 6 $282.00 $141.00
68471-3 BT 40 x End Mill Holder 1/2" - 3" DDrive 2 $287.00 $143.50
17140-1-1/2-BO BT 40 x End Mill Holders 1-1/2" - 3 9/16 with CoolBlast coolant  5 $89.00 $44.50
17140-3/8B BT 40 x End Mill Holders 3/8" - 2-1/2 with CoolBlast coolant  5 $128.00 $64.00
16177-5 BT 40 x ER 32 - 5 collet chuck 1 $347.00 $173.50
19019 BT 40 x Shrink Fit 1/8" - 90mm Slim-Line 9 $320.00 $160.00
19140-135 BT 40 x ShrinkFIT 10mm - 135mm Holder 45 $275.00 $137.50
19140 BT 40 x ShrinkFIT 10mm - 90mm Holder 22 $250.00 $125.00
19142-135 BT 40 x ShrinkFIT 12mm - 135mm Holder 41 $275.00 $137.50
19142 BT 40 x ShrinkFIT 12mm - 90mm Holder 27 $250.00 $125.00
19029 BT 40 x ShrinkFIT 5/8" - 90mm Holder 29 $360.00 $180.00
19136-135 BT 40 x ShrinkFIT 6mm - 135mm Holder 30 $275.00 $137.50
19138-135 BT 40 x ShrinkFIT 8mm - 135mm Holder 48 $275.00 $137.50
19138 BT 40 x ShrinkFIT 8mm - 90mm Holder 28 $250.00 $125.00
16432 BT 40 x SPH 13mm - 105mm high precision drill chuck 2 $372.00 $186.00
16430 BT 40 x SPH 8mm - 90mm high precision drill chuck 8 $372.00 $186.00
BT50 Tooling Description QTY. Regular  50% OFF 
21102 BT 50 - 60 degree Pull Stud 21 $36.00 $18.00
17150-1-1/2-4.5 BT 50 - End Mill Holder 1-1/2" - 4.5" 1 $312.00 $156.00
23554 BT 50 x 3/4" - 90mm Milling Chuck 10 $435.00 $217.50
66638-1.77 BT 50 x FMA 3/4" - 1.77" Dual Drive 2 $518.00 $259.00
16636-127 BT 50 x Shell Mill Adapter 1/2" - 5" 1 $648.00 $324.00
19038 BT 50 x Shrink Fit 1/4" - 3.54" 2 $940.00 $470.00
38.05.071.005 BT 50 x Shrink Fit 10mm x 100 9 $391.00 $195.50
38.05.071.105 BT 50 x Shrink Fit 10mm x 160 2 $425.00 $212.50
38.05.071.006 BT 50 x Shrink Fit 12mm x 100 6 $391.00 $195.50
38.05.071.106 BT 50 x Shrink Fit 12mm x 160 2 $425.00 $212.50
38.05.071.613 BT 50 x Shrink Fit 13mm x 200 3 $650.00 $325.00
38.05.071.007 BT 50 x Shrink Fit 14mm x 100 2 $391.00 $195.50
38.05.071.107 BT 50 x Shrink Fit 14mm x 160 4 $391.00 $195.50
38.05.071.008 BT 50 x Shrink Fit 16mm x 100 6 $391.00 $195.50
38.05.071.108 BT 50 x Shrink Fit 16mm x 160 7 $425.00 $212.50
38.05.071.009 BT 50 x Shrink Fit 18mm x 110 3 $420.00 $210.00
38.05.071.109 BT 50 x Shrink Fit 18mm x 160 2 $391.00 $195.50
38.05.071.022 BT 50 x Shrink Fit 22mm x 120 4 $405.00 $202.50
38.05.071.024 BT 50 x Shrink Fit 24mm x 120 8 $391.00 $195.50
38.05.071.011 BT 50 x Shrink Fit 25mm x 120 5 $391.00 $195.50
38.05.071.111 BT 50 x Shrink Fit 25mm x 160 2 $425.00 $212.50
19042 BT 50 x Shrink Fit 3/8" - 3.54" 2 $940.00 $470.00
38.05.071.004 BT 50 x Shrink Fit 8mm x 100 1 $391.00 $195.50
38.05.071.021 BT 50 x ShrinkFIT 1" x 120mm Holder 6 $391.00 $195.50
16442 BT 50 x SPH 13mm - 115mm high precision drill chuck 5 $400.00 $200.00
38.05.071.010 BT 50 xShrink Fit 20mm x 110 8 $391.00 $195.50
Capto Tooling Description QTY. Regular  50% OFF 
141.122.25.052 Capto C4 x ER 25 - 52mm Collet Chuck 42 $385.00 $192.50
141.651.61.315 Capto C4 x ShrinkFIT 5/8" - 3.15" Holder 7 $439.00 $219.50
141.653.54.197 Capto C4 x SLN 1/4" - 1.97" End Mill Holder 43 $350.00 $175.00
141.651.55.295 Capto C4 x ShrinkFIT 5/16" - 2.95" Holder 10 $439.00 $219.50
142.651.53.315 Capto C5 x ShrinkFIT 3/16 - 80mm Holder 10 $795.00 $397.50
142.651.64.315 Capto C5 x ShrinkFIT 3/4 - 80mm Holder 12 $795.00 $397.50
142.651.56.315 Capto C5 x ShrinkFIT 3/8 - 80mm Holder 10 $795.00 $397.50
142.651.61.315 Capto C5 x ShrinkFIT 5/8 - 80mm Holder 16 $795.00 $397.50
143.481.15N.100 Capto C6 - MDNNN-H15 External Turning 15 $454.00 $227.00
143.122.25.060 Capto C6 x ER 25 - 60mm Collet Chuck 14 $420.00 $210.00
143.151.72.200 Capto C6 x FMA 1-1/4" - 2" Collet Chuck 8 $420.00 $210.00
143.651.72.374 Capto C6 x ShrinkFIT 1-1/4" - 3.74" Holder 14 $483.00 $241.50
143.653.55.217 Capto C6 x SLN 5/16" - 2.17" End Mill Holder 15 $378.00 $189.00
CAT40 Tooling Description QTY. Regular  50% OFF 
21117 CAT 40 - 15 degree Pull Stud 90 $30.00 $15.00
32900/40CAT CAT 40 T/C Tap Holder #4 3 $1,004.00 $502.00
TE-22CN CAT 40 x ER 32 Short Castle Nut 119 $59.00 $29.50
CAT40ER40-3.15 CAT 40 x ER 40 - 3.15" Collet Chuck 136 $135.00 $67.50
FI-72717-4 CAT 40 x Face Mill Arbor 1-1/2" - 4" w/ DDrive 23 $382.00 $191.00
FI-72715-4 CAT 40 x Face Mill Arbor 1-1/4" - 4" w/ DDrive 38 $342.00 $171.00
FI-72715-6 CAT 40 x Face Mill Arbor 1-1/4" - 6" w/ DDrive 30 $342.00 $171.00
22462 CAT 40 x High Precision drill chuck 5/8" - 6" 6 $480.00 $240.00
TE-31.651.020.700B CAT 40 x SF 13/64" - 7" w/ CoolBlast coolant  1 $567.00 $283.50
TE-31.651.057.400B CAT 40 x SF 7/16" - 4" w/ CoolBlast coolant  1 $350.00 $175.00
TE-31.651.011.375B CAT 40 x SF 7/64" - 3.75" w/ CoolBlast coolant  1 $340.00 $170.00
TE-31.153.32.131.751 CAT 40 x Shell Mill Adapter 32mm - 131.751 1 $363.00 $181.50
9999998-FID CAT 40 x Shrink Fit 1/2" - 3.75" DDrive 14 $590.00 $295.00
9999999-FID CAT 40 x ShrinkFIT 3/4"- 4" DDrive w/ CoolBLAST  14 $590.00 $295.00
CAT40SLN1-1/4-2 CAT 40 x SLN 1-1/4" - 2" End Mill Holder 262 $89.00 $44.50
FI-72927-6 CAT 40 x SLN 1-1/4" - 6" End Mill Holder w/ DDrive 42 $369.00 $184.50
CAT40SLN1 CAT 40 x SLN 1" - 4" End Mill Holder 241 $80.00 $40.00
FI-72920-5.75 CAT 40 x SLN 5/8" - 5.75"End Mill Holder w/ DDrive 33 $210.00 $105.00
CAT50 Tooling Description QTY. Regular  50% OFF 
21111 CAT 50 - 90 degree Pull Stud 2 $35.00 $17.50
21142 CAT 50 Pull Stud 30 $30.00 $15.00
21114-C CAT 50 Retention Knob - 90 deg Coolant 49 $44.00 $22.00
22949-8 CAT 50 x End Mill Holder 1-1/2" - 8 11 $173.00 $86.50
22939-7.5-RR CAT 50 x End Mill Holder 5/8" - 7.5" Rigid Reach 3 $315.00 $157.50
CAT50ER16-6 CAT 50 x ER 16 - 6" Collet Chuck 120 $160.00 $80.00
FI-72287 CAT 50 x ER 16 - 8" Holder w/ DDrive 26 $410.00 $205.00
CAT50ER20-6 CAT 50 x ER 20 - 6" Collet Chuck 115 $150.00 $75.00
22325F CAT 50 x ER 40 - 6"w/CoolFLEX DIN B Coolant 2 $335.00 $167.50
22470 CAT 50 x High Precision drill chuck 5/16" - 4" 7 $425.00 $212.50
17.05.043.232 CAT 50 x Hydraulic 10mm x 68mm Holder 9 $550.00 $275.00
17.05.043.234 CAT 50 x Hydraulic Chuck 14mm x 80mm 2 $1,100.00 $550.00
17.05.043.235 CAT 50 x Hydraulic Chuck 16mm x 80mm 3 $1,100.00 $550.00
17.05.043.239 CAT 50 x Hydraulic Chuck 32mm x 81mm 1 $1,280.00 $640.00
17.05.043.230 CAT 50 x Hydraulic Chuck 6mm x 68mm 2 $1,100.00 $550.00
73224 CAT 50 x Milling Chuck 1-1/4" - 6" Dual Drive 2 $803.00 $401.50
73216 CAT 50 x Milling Chuck 3/4" - 6" Dual Drive 2 $760.00 $380.00
TE-29070-FID CAT 50 x Shrink Fit 1" - 6" with coolant grooves 7 $450.00 $225.00
29262-8 CAT 50 x Shrink Fit 10mm - 8" 5 $596.00 $298.00
TE-29058-6-FID CAT 50 x Shrink Fit 3/8" - 6" with coolant grooves 2 $450.00 $225.00
79282 CAT 50 x Shrink Fit 32mm - 100mm w/ DDrive 2 $448.00 $224.00
TE-29072-FID CAT 50 x ShrinkFIT 1-1/4" - 4.13" with CoolBLAST  18 $400.00 $200.00
29074 CAT 50 x ShrinkFIT 1-1/4" - 4.72" Holder 15 $340.00 $170.00
FI-79060B CAT 50 x ShrinkFIT 1/2"- 3.94" w/ DDrive & CoolFLEX 8 $750.00 $375.00
FI-79064B CAT 50 x ShrinkFIT 3/4" - 4.13" w/ DDrive & CoolFLEX 8 $750.00 $375.00
TE-29062-6-FID CAT 50 x ShrinkFIT 5/8" - 6" Holder with CoolBLAST  19 $450.00 $225.00
79062B CAT 50 x ShrinkFit 5/8"-3.94" DDrive CoolFLEX & BLAST 10 $750.00 $375.00
TE-32.651.022.400B CAT 50 x ShrinkFIT 7/32" - 4" w/ CoolBlast  6 $870.00 $435.00
23688 CAT 50 x Slim Fit 20-6" Collet Chuck with wrench 2 $504.00 $252.00
CAT50SLN1/4 CAT 50 x SLN 1/4" - 4" End Mill Holder 78 $110.00 $55.00
FI-72941-1.44 CAT 50 x SLN 3/4" - 1.44"End Mill Holder w/  DDrive 33 $258.00 $129.00
C50TG150-7.5 CAT 50 x TG 150 - 7.5" 1 $950.00 $475.00
HSK Tooling Description QTY. Regular  50% OFF 
95905 HSK 100A x Face Mill Arbor 1-1/4" - 2-1/2" 3 $405.00 $202.50
95.05.031.026 HSK 100A x SLN 20mm - 100mm 2 $478.00 $239.00
39084 HSK 40A x Shrink Fit 4mm - 80mm w/ Slim Line 4 $222.00 $111.00
85.05.008.001 HSK 50E x ER 25 - 80 2 $250.00 $125.00
31402-E HSK 50E x ER16 - Holder with 46116 nut 73 $275.00 $137.50
85.02.045.750 HSK 50E x FMA 3/4" - 60mm 3 $350.00 $175.00

170.05.008.004-100

HSK 50F x ER32 - 100 Collet Chuck 9 $350.00 $175.00
32968 HSK 63A x End Mill Holder 2" - 150mm 1 $508.00 $254.00
32846 HSK 63A x End Mill Holder 50mm - 150mm 2 $508.00 $254.00
TE-73.463G.64.120 HSK 63A x MLD 3/4 - 120mm Milling Chuck 11 $480.00 $240.00
93126-6B HSK 63A x Shrink Fit 1" x 6" with CoolBlast 12 $450.00 $225.00
39032-2.76 HSK 63A x Shrink Fit 1/4" - 2.76" 1 $305.00 $152.50
93.05.071.013 HSK 63A x Shrink Fit 1/8" x 80 1 $425.00 $212.50
93117-8.2 HSK 63A x Shrink Fit 3/8 - 8.2" 1 $445.00 $222.50
39034-2.76 HSK 63A x Shrink Fit 5/16" - 2.76" 2 $305.00 $152.50
39037-2.95 HSK 63A x Shrink Fit 7/16" - 2.95" 5 $305.00 $152.50
39039-2.95 HSK 63A x Shrink Fit 9/16" - 2.95" 5 $315.00 $157.50
93117-6B HSK 63A x ShrinkFIT 3/8" - 6" Holder with CoolBlast  12 $596.00 $298.00
93121-6B HSK 63A x ShrinkFIT 5/8" - 6" w/ Holder w/ CoolBlast  19 $600.00 $300.00
93723-6B HSK 63A x SLN 3/4"- 6" End Mill Holder w/ CoolBlast  17 $385.00 $192.50
41055-8SC HSK 63F x 1.25" - 50 with 8mm cap 3 $345.00 $172.50
TE-41086-100-NH HSK 63F x 1" - 100mm Arbor with no hole 24 $398.00 $199.00
TE-41086-120-NH HSK 63F x 1" - 120 Arbor with no hole 14 $400.00 $200.00
41086-95-8SC HSK 63F x 1" - 95mm Arbor with 8mm cap 2 $350.00 $175.00
41091 HSK 63F x 50mm - 153mm Arbor 5 $398.00 $199.00
94.11.027.004 HSK 80 Coolant Pipe 3 $44.00 $22.00
94.11.026.004 HSK 80 Coolant Pipe Wrench 6 $67.00 $33.50
95.11.016.005 HSK100A spindle wiper 3 $125.00 $62.50
ISO / DAT / SK Description QTY. Regular  50% OFF 
42227 DAT 40 x ER 16 - 100mm collet chuck 21 $154.00 $77.00
49060 DAT 30 x Shrink Fit 3/8" - 3.15" 3 $320.00 $160.00
TE-40001.2-4.939 DAT 40 x 2" - 4.939" 5 $368.00 $184.00
TE-49062.0.375.63-CMS ISO 30 CMS x Shrink Fit 3/8" - 63mm 2 $250.00 $125.00
TE-52700-100-W ISO 30 x 1" - 100mm Arbor 6 $245.00 $122.50
TE-64.05.071.750-S ISO 30 x Shrink Fit 3/4" x 80mm for Thermwood 7 $224.00 $112.00
348004 ISO 40 x 1/2 Gas - 1.25 with retention 23 $210.00 $105.00
86298-3.66 ISO 40 x SF 1/2" - 93mm Shrink Fit Chuck 7 $451.50 $225.75
86297-3.66 ISO 40 x SF 3/8" - 93mm Shrink Fit Chuck 8 $451.50 $225.75
TE-42718-31.75-3H ISO 40 x Shell Mill Adapter 1-1/4" - 5-1/8" 7 $343.00 $171.50
TE-99080-3.25 ISO 40 x Shrink Fit 1" - 3.25" DDrive 3 $580.00 $290.00
TE-99074-0.375-3.25 ISO 40 x Shrink Fit 3/8" - 3.25" DDrive 3 $580.00 $290.00
TE-99077-0.625-3.25 ISO 40 x Shrink Fit 5/8" - 3.25" DDrive 3 $580.00 $290.00
348006 ISO 40 x ST35 - 107.85 with nut 76 $238.00 $119.00
Tap Collets Description QTY. Regular  50% OFF 
19/1-1010 M10 Size 1 Quick Change Clutch Tap Collet 5 $85.00 $42.50
19/1-129 M12 Size 1 Quick Change Clutch Tap Collet 2 $85.00 $42.50
31/2-1411 M14 - Size 2 Clutch Tap Collet 11 x 9 6 $120.00 $60.00
31/2-14105 M14 - Size 2 Clutch Tap Collet D10.5x8 1 $120.00 $60.00
48/13-2016 M20 x 16 - Size 3 Rigid Tap Collet 1 $115.00 $57.50
60/14-2218 M30 - Size 4 Rigid Tap Collet 1 $175.00 $87.50
48/3-002822 M36 - Size 3 Clutch Tap Collet (28x22mm) 1 $275.00 $137.50
19/1-6649 M6 Size 1 Quick Change Clutch Tap Collet 5 $85.00 $42.50
19/1-77 M7 Size 1 Quick Change Clutch Tap Collet 5 $85.00 $42.50
05804-M10-DIN371 ER 20 Quick Change M10 Tap Collet 1 $52.00 $26.00
05804-M12-DIN376 ER 20 Quick Change M12 Tap Collet 1 $52.00 $26.00
19/11-3527 Size 1 Quick Change Tap Collet 3.5x2.7 1 $31.00 $15.50
Miscellaneous Description QTY. Regular  50% OFF 
02112 High Precision Drill Chuck 08H x JT1 - range 0-5/16" 10 $93.00 $46.50
86152 Slim Fit 20 - Shrink Fit 3mm 10 $126.00 $63.00
86153 Slim Fit 20 - Shrink Fit 4mm 8 $126.00 $63.00
18851-03S Slim Fit 6 - 3mm sealed collet 5 $130.00 $65.00
18851-05S Slim Fit 6 - 5mm Sealed Collet 1 $130.00 $65.00
83868-15/32 SYOZ - 25 15/32 Collet 3 $27.00 $13.50
83868-21/32 SYOZ - 25 21/32 Collet 4 $27.00 $13.50
83512-05.5 SYOZ 20/EOC 12 - 5.5mm Collet 3 $36.00 $18.00
08425 ER 25 Coolant Nut 20 $52.50 $26.25
08432 ER 32 Coolant Nut 1 $59.50 $29.75
86053-6.3 C32 x ShrinkFIT Ext. 32mm O.D. - 18mm I.D. - 6.3 length" 1 $252.00 $126.00
TE-72.ER20-50 C1-1/4 x ER 20 - 50mm 4 $115.00 $57.50
05180 1" x ER 16M - 130mm straight shank ER collet chuck 2 $215.00 $107.50
19472-5/16 1/2 OD - 5/16 ID Sleeve 7 $99.00 $49.50
19462-13 20mm OD - 13mm ID Sleeve 2 $99.00 $49.50
19462-14.5 20mm OD - 14.5mm ID Sleeve 5 $99.00 $49.50
19462-15 20mm OD - 15mm ID Sleeve 6 $99.00 $49.50
19462-09 20mm OD - 9mm ID Sleeve 3 $99.00 $49.50
05.023.009 25mm OD - 3/4 ID Sleeve hydraulic reduction sleeve 25 $99.00 $49.50
86072 5/8" to 7/16" Shrink Fit Extension 2 $203.00 $101.50
86065-6 5/8" x 5mm - 6" Shrink Fit Extension  4 $210.00 $105.00
81705-1/2 5C 1/2 Collet 4 $16.00 $8.00
81705-11/16 5C 11/16 Collet 4 $16.00 $8.00
81705-23/32 5C 23/32 Collet 2 $16.00 $8.00
81705-27/32 5C 27/32 Collet 2 $16.00 $8.00
81705-3/16 5C 3/16 Collet 14 $16.00 $8.00
3251334 SEET 13T3AGSN-M01 OM2010 aluminum inserts 200 $12.25 $6.13
00100-HS1 Heat Sink 1/8" - 1/4" 9 $98.00 $49.00
00100-HS2 Heat Sink 1/4" - 5/16" 10 $98.00 $49.00
00100-HS3 Heat Sink 3/8" - 5/8" 6 $98.00 $49.00
00100-HS4 Heat Sink 5/8" - 3/4" 12 $98.00 $49.00
00100-HS5 Heat Sink 3/4" - 1" 13 $98.00 $49.00
00100-HS6 Heat Sink 1" - 1-1/4" 15 $98.00 $49.00

 


Order from your Distributor or call us to find your Distributor:
(800) 597-3921 or local (317) 803-8000
info@techniksusa.com