Reducers

Reduce inventory of expensive tool holders by using reducers and extensions to meet your boring requirements.
Reducers are used to adapt smaller boring heads to larger tool holders.
Our reducers and extensions include coolant through spindle capabilities for optimal chip removal and cutting efficiency.

Reducers

Part No.	D	d	D1	d1	L	c
R 27.22.36	27mm	15mm	22mm	12mm	26mm	10mm
R 32.22.40W	32mm	20mm	22mm	12mm	30mm	10mm
R 42.22.58	42mm	24mm	22mm	12mm	48mm	10mm
R 54.22.86	54mm	28mm	22mm	12mm	76mm	10mm
R 68.22.102	68mm	36mm	22mm	12mm	90mm	12mm
R 32.27.34W	32mm	20mm	27mm	15mm	24mm	10mm
R 42.27.50	42mm	24mm	27mm	15mm	40mm	10mm
R 54.27.80	54mm	28mm	27mm	15mm	70mm	10mm
R 68.27.95	68mm	36mm	27mm	15mm	83mm	12mm
R 42.32.46W	42mm	24mm	32mm	20mm	36mm	10mm
R 54.32.76W	54mm	28mm	32mm	20mm	66mm	10mm
R 68.32.90 W	68mm	36mm	32mm	20mm	78 mm	12mm
R 54.42.70	54mm	28mm	42mm	24mm	60mm	10mm
R 68.42.82	68mm	36mm	42mm	24mm	70mm	12mm
R 85.42.95	85mm	50mm	42mm	24mm	83mm	12mm
R 68.54.72	68mm	36mm	54mm	28mm	60mm	12mm
R 85.54.90	85mm	50mm	54mm	28mm	78mm	12mm
R 85.68.100	85mm	50mm	68mm	36mm	88mm	12mm
R 100.85.100	100mm	60mm	85mm	50mm	88mm	12mm