High-Performance Milling Chucks

Our new line of milling chucks are Techniks Certified for accuracy and holding power. They feature T.I.R. of only 0.0002" and are exceptionally rigid, to resist lateral distortion while cutting heavy loads.

We stock a full line of inch or metric reduction sleeves for these chucks, in all popular shank sizes from 1/8" to 1". You can choose from shower coolant (shown) or coolant-thru-tool as desired.

Click HERE to jump to the product page and see the full line of CAT and BT High Performance milling chucks. If you have any questions call us at: (800) 597-3921, or send us an email: info@techniksusa.com to request our catalog.

Steel Sealed Coolant Collets
No Seals To Fail – EVER!

Features:

• No seals to fail
• Sealed up to 2,000 P.S.I.
• No coolant discs to install
• Uses standard ER holders and nuts

Steel sealed collets are available for ER 16 to ER 40 size holders. We stock all standard sizes from 3/32" to 1" for coolant-thru-tool shank sizes. Steel sealed collets work with ER holders & nuts with a coolant-thru retention knob, or with DIN coolant style holders.

You can click HERE to see the full line of Steel Sealed Coolant Collets. For more information please call us at: (800) 597-3921, or send us an email: info@techniksusa.com to request our catalog.

Slim-Fit Modular Tool Holding System

Slim-Fit provides the reach and accuracy you need, PLUS the ability to change tools easily.

Slim-Fit combines the best features of collet chucks, (fast tool changes and fits a variety of shank sizes) with unmatched rigidity, accuracy, and balance. All in one system.

• Interchangeable collets for fast tool changes
• Slim design fits in tight spaces
• T.I.R. only 0.0002"
• Balanced to 18,000 RPM @ G2.5

To find out more about Slim-Fit you can browse the product pages under the CNC Machine Tooling menu above, or call us at: (800) 597-3921. Send us an email: info@techniksusa.com to request our catalog by mail.

CAT40, CAT50 Coolant-Thru End Mill Holders

Our special coolant-thru end mill holders feature special grooves in the bore that allow coolant to flood the tool and cutting zone. The additional coolant allows you to increase feed rates and extend tool life.

Available for 1/4", 3/8" 1/2", 3/4" and 1" shank sizes.

To find out more about these holders, call us at: (800) 597-3921, or send us an email: info@techniksusa.com to request our catalog.

Shrink-Fit Extensions For All Toolholders

Works with end mill holders, hydraulic chucks, collet chucks, milling chucks, and shrink-fit holders. Now you can add shrink-fit capability without the expense of buying dedicated shrink-fit toolholders.

• More rigid than collet & nut extensions
• Better T.I.R.
• Extended reach
• Slim design (minimal O.D. at the nose)
• Increase tool life

For shank sizes: 1/8" 3/16", 1/4", 3/8", 1/2", 5/8"

Call us at: (800) 597-3921 for more information about Shrink-fit Extensions. Send us an email to: info@techniksusa.com to request the Shrink-fit Extensions brochure sent to you by email in pdf format.

CoolFLEX End Mill Holders and ER Collet Chucks
Run DIN or Coolant-Thru with the same holder!

CoolFLEX ER collet chucks and end mill holders feature a coolant
path that can be switched from coolant-thru spindle to DIN style coolant simply by removing two setscrews. Now you don't have to buy machine-specific toolholders.

CoolFLEX holders are available in ER collet chucks and endmill holder styles for CAT40 and CAT50 spindles. The collet chucks are available in sizes from ER16 to ER40 and are balanced to 18,000 RPM. The endmill holder styles range from I.D. 1/4” to I.D. 1-1/4” and are balanced to 10,000 RPM.

Call us at: (800) 597-3921 for more information about CoolFLEX holders. Send us an email to: info@techniksusa.com to request the CoolFLEX brochure sent to you by email in pdf format.

CNC Router Aggregate Heads For Any Job

Let us quote your next aggregate order. From boring, sawing, routing, notching, lock-recess, – to chain-sawing – nothing beats Techniks aggregate heads.

Because o ur aggregate heads are built to a higher quality standard than the competition, we can guarantee that ours provide unmatched performance.

If you are considering purchasing aggregate heads you should find out more about ours. We are confident that once you see our aggregates perform, and hear how smoothly they run, you will never go back to the competition.

You can click HERE to find out more about Techniks aggregates, call us at: (800) 597-3921, or send us an email: info@techniksusa.com to request our aggregate head brochure sent to you by email in pdf format.

BT and CAT Mini-Nut Holders for Tight Clearance

Now you can get Techniks Certified tool holders with ER Mini Nuts for applications that have tight clearance requirements.

BT30, BT40, CAT40, CAT50 Mini Nut holders are available in ER11, ER16, and ER 20 sizes to fit tool shanks from .275" to .512".

For more information call us at: (800) 597-3921, or send us an email: info@techniksusa.com to request our catalog.

Techno-Shrink Ultra

The Techno-Shrink Ultra features fast (6-10 seconds) tool changes using induction heat. Cooling is fully automatic using a programmable air-cooling cycle.

If you are looking for a fast, cost-effective shrink-fit solution, the Techno-Shrink ultra can save you thousands of dollars and provides enough shrinking capability to service a fast-paced shop floor environment.

You can click HERE to find out more about our shrink-machines, call us at: (800) 597-3921, or send us an email: info@techniksusa.com to request our catalog.