ER collet chucks handle a wide range of machining jobs without having to buy new tool holders. Simply choose the right size collet for the job, set tool depth, and tighten the collet nut and pull stud to the proper torque using a torque wrench and tightening fixure.
|
Techniks Collet Chuck Advantages
• Balanced to 25,000 RPM at G2.5
• .0001" runout from taper to pocket
• Taper ground to AT3 standard
• Each holder is lab tested and certified
Techniks tool holders are manufactured to the highest possible standards to extend perishable cutting tool life and improve CNC machine performance.
Collets are available for: drilling, milling, coolant thru, and high-speed applications. Special “DNA” Dead Nuts Accurate collets are used for small drills (6mm and smaller) to maintain T.I.R. at those sizes.
Use "Power Coat" nuts to increase the holding power and safety of your tool holders. High holding power extends cutting tool life and improves surface finish.
Refer to the chart below to order BT 40 ER collet chuck tool holders. |
BT 40 ER Collet Chuck Tool Holders
Note: ER 16 and ER 20 tool holders come with hex nut standard. For slotted nuts simply ad SLOTNUT to the end of the part number.
Refer to the last chart to order CoolFLEX DIN B coolant or coolant-thru-tool, switchable tool holders.
|
Part No.
|
Description |
I1 |
D |
Collet |
Max. Shank |
Stop Screw |
Wrench |
| 06151 |
BT 40 x ER 16-70, hex nut |
70mm |
1.08" |
ER16 |
.406" |
06083 |
04609 |
| 06153 |
BT 40 x ER 16-100, hex nut |
100mm |
1.08" |
ER16 |
.406" |
06083 |
04609 |
| 06155 |
BT 40 x ER 16-125, hex nut |
125mm |
1.08" |
ER16 |
.406" |
06083 |
04609 |
| 06157 |
BT 40 x ER 16-150, hex nut |
150mm |
1.08" |
ER16 |
.406" |
06083 |
04609 |
| 06158 |
BT 40 x ER 16-180, hex nut |
180mm |
1.08" |
ER16 |
.406" |
06083 |
04609 |
| 06159 |
BT 40 x ER 20-70, hex nut |
70mm |
1.34" |
ER20 |
.512" |
06085 |
04610 |
| 06162 |
BT 40 x ER 20-100, hex nut |
100mm |
1.34" |
ER20 |
.512" |
06085 |
04610 |
| 06165 |
BT 40 x ER 20-135, hex nut |
135mm |
1.34" |
ER20 |
.512" |
06085 |
04610 |
| 06167 |
BT 40 x ER 20-150, hex nut |
150mm |
1.34" |
ER20 |
.512" |
06085 |
04610 |
| 06169 |
BT 40 x ER 25-70, slotted nut |
70mm |
1.65" |
ER25 |
.630" |
06089 |
04615 |
| 06171 |
BT 40 x ER 25-100, slotted nut |
100mm |
1.65" |
ER25 |
.630" |
06089 |
04615 |
| 06175 |
BT 40 x ER 25-150, slotted nut |
150mm |
1.65" |
ER25 |
.630" |
06089 |
04615 |
| 06177 |
BT 40 x ER 32-70, slotted nut |
70mm |
1.97" |
ER32 |
.788" |
06089 |
04616 |
| 06179 |
BT 40 x ER 32-100, slotted nut |
100mm |
1.97" |
ER32 |
.788" |
06089 |
04616 |
| 06181 |
BT 40 x ER 32-150, slotted nut |
150mm |
1.97" |
ER32 |
.788" |
06089 |
04616 |
| 06183 |
BT 40 x ER 40-80, slotted nut |
80mm |
2.48" |
ER40 |
1.023" |
06089 |
04617 |
| 06185 |
BT 40 x ER 40-100, slotted nut |
100mm |
2.48" |
ER40 |
1.023" |
06089 |
04617 |
| 06189 |
BT 40 x ER 40-150, slotted nut |
150mm |
2.48" |
ER40 |
1.023" |
06089 |
04617 |
BT 40 ER CoolFLEX Tool Holders
Note: ER 16 and ER 20 tool holders come with hex nut standard. For slotted nuts simply ad SLOTNUT to the end of the part number. |
|
|
Part No.
|
Description |
I1 |
D |
Collet |
Max. Shank |
Stop Screw |
Wrench |
| 06151F |
BT 40 x ER 16-70 |
70mm |
1.08" |
ER16 |
.406" |
06083 |
04609 hex |
| 06153F |
BT 40 x ER 16-100 |
100mm |
1.08" |
ER16 |
.406" |
06083 |
04609 hex |
| 06157F |
BT 40 x ER 16-150 |
150mm |
1.08" |
ER16 |
.406" |
06083 |
04609 hex |
| 06159F |
BT 40 x ER 20-70 |
70mm |
1.34" |
ER20 |
.512" |
06085 |
04610 hex |
| 06162F |
BT 40 x ER 20-100 |
100mm |
1.34" |
ER20 |
.512" |
06085 |
04610 hex |
| 06167F |
BT 40 x ER 20-150 |
150mm |
1.34" |
ER20 |
.512" |
06085 |
04610 hex |
| 06177F |
BT 40 x ER 32-70 |
70mm |
1.97" |
ER32 |
.788" |
06089 |
04616 |
| 06181F |
BT 40 x ER 32-150 |
150mm |
1.97" |
ER32 |
.788" |
06089 |
04616 |
|
|
