SlimFIT 6 Collets

Use Slim-Fit 6 collets with CAT, HSK, or BT SlimFIT tool holders. Shank sizes from 5/32" to 1/4".

Slim-Fit 6 collets Slim-Fit 6 collet diagram
SlimFIT Inch Size 6 Collets
(Tighten to 9 ft/lbs.)
Part No.
Description
18851-3/32
SlimFIT 6 - 3/32" collet
18851-7/64
SlimFIT 6 - 7/64" collet
18851-1/8
SlimFIT 6 - 1/8" collet
18851-9/64
SlimFIT 6 - 9/64" collet
18851-5/32
SlimFIT 6 - 5/32" collet
18851-11/64
SlimFIT 6 - 11/64" collet
18851-3/16
SlimFIT 6 - 3/16" collet
18851-13/64
SlimFIT 6 - 13/64" collet
18851-7/32
SlimFIT 6 - 7/32" collet
18851-15/64
SlimFIT 6 - 15/64" collet
18851-1/4
SlimFIT 6 - 1/4" collet
SlimFIT Metric Size 6 Collets
(Tighten to 9 ft/lbs.)
Part No.
Description
18851-03
SlimFIT 6 - 3mm collet
18851-04
SlimFIT 6 - 4mm collet
18851-05
SlimFIT 6 - 5mm collet
18851-05.5
SlimFIT 6 - 5.5mm collet
18851-06 SlimFIT 6 - 6mm collet

SlimFIT 6 Collet Set
Part No.
Description
18743-12IMS
SlimFIT 6 - 12 pc. set

 

SlimFIT 20 Collets

 
SlimFIT Inch Size 20 Collets
(Tighten to 74 ft/lbs.)
Part No.
Description
18853-1/8 SlimFIT 20 1/8" collet
18853-3/16 SlimFIT 20 3/16" collet
18853-1/4 SlimFIT 20 1/4" collet
18853-5/16 SlimFIT 20 5/16" collet
18853-3/8 SlimFIT 20 3/8" collet
18853-1/2 SlimFIT 20 1/2" collet
18853-5/8 SlimFIT 20 5/8" collet
18853-3/4 SlimFIT 20 3/4" collet
SlimFIT Metric Size 20 Collets
(Tighten to 74 ft/lbs.)
Part No.
Description
18853-06 SlimFIT 20 6mm collet
18853-08 SlimFIT 20 8mm collet
18853-10 SlimFIT 20 10mm collet
18853-12 SlimFIT 20 12mm collet
18853-14 SlimFIT 20 14mm collet
18853-16 SlimFIT 20 16mm collet
18853-18 SlimFIT 20 18mm collet
18853-20 SlimFIT 20 20mm collet

SlimFIT 20 Collet Set
Part No.
Description
18853-8(METRIC) SlimFIT 20 Metric Collet Set - 8 pcs.

 

How a SlimFIT tool holder works




Torx Wrench Drawbar Slim-Fit 20 Collets Extensions Slim-Fit 6 Collets
Actuates drawbar thru the pull stud for fast tool changes. Holds collet or extension more tightly and more accurately than ER chucks. Collets provide good rigidity, and the nut-less design allows a small nose for better clearance and is better balanced too. Additional reach when you need it and the nose O.D. of only .472" is great for tight clearance applications. Same powerful drawbar holding power for improved accuracy and tool life.