HSK63F ShrinkFIT Toolholders

Techniks Certified for accuracy and balance.
Each holder comes with a complete lab report

ShrinkFIT Features

  • T.I.R. only 0.0001"
  • Balanced to 25,000 RPM at G2.5
  • Comes with coolant-thru set screw installed

ShrinkFIT tooling improves cutting tool life, cutting ability, surface finish, and produces less wear-and tear on spindle bearings. Ideal for high speed or high torque machining applications.

RUN FASTER: Spindle speeds and feeds are increased to reduce cycle times & increase R.O.I.

RUN BETTER: ShrinkFIT permits better balanced chip loads so machining is more accurate and finish is improved.

SAVE MONEY: Tool life is extended by as much as 700% dramatically impacting your tooling budget.

Click HERE to learn more about ShrinkFIT tooling

HSK63F Inch ShrinkFIT Toolholders

Refer to the chart below to order HSK63F ShrinkFIT toolholders. Click on part number link to download CAD file.
Part No.
Description
d1
d2
d3
I1
I2
thread
coolant screw
HSK63F x 1/4" I.D. - 3.15"
1/4"
.83"
1.06"
3.15"
1.42"
M5 x 0.8P
16080C-20
71312 HSK63F x 5/16" I.D. - 3.74"
5/16"
.79"
1.06"
3.74"
1.42"
M6 x 1.0P
16081C-20
HSK63F x 3/8" I.D. - 3.74"
3/8"
.94"
1.26"
3.74"
1.65"
M8 x 1.25P
16082C-20
HSK63F x 1/2" I.D. - 3.74"
1/2"
.94"
1.26"
3.74"
1.85"
M10 x 1.5P
16083C-20
71625 HSK63F x 5/8" I.D. - 3.74"
5/8"
1.06"
1.34"
3.74"
1.97"
M12 x 1.75P
16085C-20
HSK63F x 3/4" I.D. - 3.94"
3/4"
1.42"
1.65"
3.94"
1.05"
M16 x 2.0P
16089C-20
HSK63F x 1" I.D. - 4.53"
1"
1.42"
1.65"
4.53"
2.28"
M20 x 2.0P
16091C-20

HSK63F Metric ShrinkFIT Toolholders

Part No.
Description
d1
d2
d3
I1
I2
thread
coolant screw
HSK63F x 20mm I.D. - 100mm
20mm
33mm
44mm
100mm
52mm
M16 x 2.0P
16089C-20
71011
HSK63F x 25mm I.D. - 115mm
25mm
44mm
53mm
115mm
58mm
M20 x 2.0P
16091C-20