Metric O.D. / Metric I.D. Reduction Sleeves for Hydraulic Tool Holders

Techniks Quality Features

Use Sleeves to run a variety of shank sizes
T.I.R. of only 0.00012"
Sealed to 1000 P.S.I for collant applications

Metric OD/Inch ID

Metric OD/Metric ID

Inch OD/Inch ID

Metric O.D. / Metric I.D. Reduction Sleeves for Hydraulic Tool Holders

Part No.	Description	d1	D	D1	L	L1	L2
05.024.001	20mm OD - 6mm ID	6mm	20mm	24mm	52.90mm	50.9mm	2mm
05.024.002	20mm OD - 8mm ID	8mm	20mm	24mm	52.90mm	50.9mm	2mm
05.024.003	20mm OD - 10mm ID	10mm	20mm	24mm	52.90mm	50.9mm	2mm
05.024.004	20mm OD - 12mm ID	12mm	20mm	24mm	52.90mm	50.9mm	2mm
05.024.005	20mm OD - 14mm ID	14mm	20mm	24mm	52.90mm	50.9mm	2mm
05.024.006	20mm OD - 16mm ID	16mm	20mm	24mm	52.90mm	50.9mm	2mm
05.024.012	32mm OD - 10mm ID	10mm	32mm	40mm	66mm	62mm	4mm
05.024.013	32mm OD - 12mm ID	12mm	32mm	40mm	66mm	62mm	4mm
05.024.014	32mm OD - 14mm ID	14mm	32mm	40mm	66mm	62mm	4mm
05.024.015	32mm OD - 16mm ID	16mm	32mm	40mm	66mm	62mm	4mm
05.024.016	32mm OD - 18mm ID	18mm	32mm	40mm	66mm	62mm	4mm
05.024.018	32mm OD - 20mm ID	20mm	32mm	40mm	66mm	62mm	4mm
05.024.020	32mm OD - 25mm ID	25mm	32mm	40mm	66mm	62mm	4mm