High holding power extends cutting tool life and improves surface finish.
|
HP3 = High Precision, High Power, High Performance
• Holds 4 times tighter than standard drill chucks
• High speed design for 10,000 RPM
• One-piece design. Chuck will not come off
during operation (Safety First)
Handle a wide range of machining jobs without having to buy new tool holders. Simply set tool depth, and tighten the pull stud to the proper torque using a torque wrench and tightening fixure.
Refer to the chart below to order HP3 drill chuck tool holders. |
HP3 High Performance Drill Chucks
Part No. |
Description |
d1 |
I1 |
| 64.05.046.051 |
ISO 30 HP3 drill chuck 1/2" |
50mm |
103mm |
| 67.05.046.001 |
BT 30 HP3 drill chuck 1/2" |
50mm |
92.5mm |
| 39.05.046.001 |
BT 40 HP3 drill chuck 1/2" |
50mm |
95.5mm |
| 38.05.046.001 |
BT 50 HP3 drill chuck 1/2" |
50mm |
106.5mm |
| 24.05.046.005 |
CAT 40 HP3 drill chuck 1/2" |
50mm |
103mm |
| 17.05.046.005 |
CAT 50 HP3 drill chuck 1/2" |
50mm |
87.5mm |
| 93.05.046.003 |
HSK 63A HP3 drill chuck 1/2" |
50mm |
123.5mm |
| 171.05.046.003 |
HSK 63F HP3 drill chuck 1/2" |
50mm |
123.5mm |
|
|