ER Straight Shank Tool Holders

ER Straight Shank tool holders


Features

  • "Power Coat" nut included with each
  • 0.0001" runout from shank to pocket
  • Precision ground for best T.I.R.

Techniks tool holders are manufactured to the highest possible standards to extend perishable cutting tool life and improve CNC machine performance.

Collets are available for: drilling, milling, coolant thru, and high-speed applications. Special “DNADead Nuts Accurate collets are used for small drills (6mm and smaller) to maintain T.I.R. at those sizes.

Use "Power Coat" nuts to increase the holding power and safety of your tool holders. High holding power extends cutting tool life and improves surface finish.

ER Straight Shank Tool Holders

Refer to chart below to order ER Straight Shank toolholders. Click part number to download CAD file.

Part No.
Description
C
L
I1
I2
D
Set Screw
Wrench
Nut Type
04851 16mm x ER 11-140mm
16mm
174.5mm
140mm
21.6mm
19mm
-
04608
hex
04855 1/2" x ER 11-140mm
1/2"
174.5mm
140mm
21.6mm
19mm
-
04608
hex
04854 5/8" x ER 11-14-0mm
5/8"
174.5mm
140mm
21.6mm
19mm
-
04608
hex
04832 5/8" x ER 16-60mm
5/8"
95.1mm
60mm
35.1mm
28mm
-
04609
hex
04834 3/4" x ER 16-50mm
3/4"
85.1mm
50mm
35.1mm
28mm
06083
04609
hex
04835 3/4" x ER 16-100mm
3/4"
135.1mm
100mm
35.1mm
28mm
06083
04609
hex
04856 3/4" x ER 16-140mm
3/4"
175.1mm
140mm
35.1mm
28mm
06083
04609
hex
04836 3/4" x ER 20-2.5"
3/4"
100mm
2 1/2"
38mm
34mm
06083
04610
hex
04858 1" x ER 20-140mm
1"
180.5mm
140mm
40.5mm
34mm
06083
04610
hex
04837 1" x ER 25-50mm
1"
101mm
50mm
51mm
42mm
06089
04615
slotted
04817 20mm x ER 32-50mm
20mm
97.1mm
50mm
47mm
50mm
06089
04616
slotted
04818 20mm x ER 32-100mm
20mm
146.5mm
100mm
47mm
50mm
06083
04616
slotted
04839 1" x ER 32-50mm
1"
101.5mm
50mm
51.5mm
50mm
06089
04616
slotted
04839-140 1" x ER 32-140mm
1"
191.5mm
140mm
51.5mm
50mm
06083
04616
slotted
04843 1 1/4" x ER 32-60mm
1 1/4"
111.5mm
60mm
51.5mm
50mm
06089
04616
slotted
04841 1" x ER 40-50mm
1"
115mm
50mm
65mm
63mm
06083
04617
slotted