Quick-Change Rigid Tap Collets

Quick-Change Rigid Tap Collets

Quick Change Rigid Tap Diagram

Features

  • Quick-Change taps in seconds
  • Reduced clearance requirements
  • Locking feature prevents spinning the tap

*Compatible with the standard collet chucks for ER, DR, RD, ESX, BR collet pockets

It can alsobe used with an axial compensating tapping head or with a CNC machining center with rigid tapping.

Use Techniks “PowerCOAT” nut for extra holding power in the collet pocket.

d SQ d2 ER 16 ER 20 ER 25 ER 32
.168" .131" 5/32" or #8 05802-168 05804-168 05806-168 05808-168
.194" .152" 3/16" or #10 05802-194 05804-194 05806-194 05808-194
.220" .165" 7/32" or #12 05802-220 05804-220 05806-220 05808-220
.255" .191" 1/4" 05802-255 05804-255 05806-255 05808-255
.318" .238" 5/16"   05804-318 05806-318 05808-318
.323" .242" 7/16"   05804-323 05806-323 05808-323
.367" .275" 1/2"   05804-367 05806-367 05808-367
.381" .286" 3/8"   05804-381 05806-381 05808-381
.429" .322" 9/16"     05806-429 05808-429
.437" .328" 1/8" NPT     05806-437 05808-437
.480" .360" 5/8"     05806-480 05808-480
.542" .406" 11/16"       05808-542
.562" .421" 1/4" NPT       05808-562
.590" .442" 3/4"       05808-590
.652" .489" 13/16"       05808-652