Compatible with the standard collet chucks for ER, DR, RD, ESX, BR or DIN 6499 collet pockets.
|
Features
-
Replaces expensive tapping heads
-
Reduced clearance requirements
Floating Tap (FT) collets do the same job as expensive tapping heads and are the most economical solution to all your tapping needs.
FT collets are great for close center distance on CNC swiss lathes, or use them to eliminate clearance problems with conventional tapping attachments.
Simply program the machine 5% behind the recommended pitch feed of the tap to make the floating collet work. Return out of the tapped hole at 100%. Use Techniks “Power Coat” nut for extra holding power in the collet pocket.
Applications: CNC lathes, VDI turrets, angle heads, CNC machine center, swiss style turning machines, and driven heads on CNC lathe turrets.
Collet Sets
| Part No. |
Qty. |
| FT-116 4(SET) |
4 |
| FT-120 5(SET) |
5 |
| FT-125 9(SET) |
9 |
| FT-132 11(SET) |
11 |
|
Floating Tap Collets
| FT-116 |
FT-120 |
FT-125 |
FT-132 |
Tap "D" |
Tap Size |
| FT-116-141 |
FT-120-141 |
FT-125-141 |
|
.141" |
1/8" or #6 |
| FT-116-168 |
FT-120-168 |
FT-125-168 |
FT-132-168 |
.168" |
5/32" or #8 |
| FT-116-194 |
FT-120-194 |
FT-125-194 |
FT-132-194 |
.194" |
3/16" or #10 |
| FT-116-220 |
FT-120-220 |
FT-125-220 |
FT-132-220 |
.220" |
7/32" or #12 |
| |
FT-120-255 |
FT-125-255 |
FT-132-255 |
.255" |
1/4" |
| B=16mm |
|
FT-125-318 |
FT-132-318 |
.318" |
5/16" |
| F=7mm |
B=20mm |
FT-125-323 |
FT-132-323 |
.323" |
7/16" |
| |
F=7mm |
FT-125-367 |
FT-132-367 |
.367" |
1/2" |
| |
|
FT-125-381 |
FT-132-381 |
.381" |
3/8" |
| |
|
|
FT-132-429 |
.429" |
9/16" |
| |
|
B=25mm |
FT-132-437 |
.437" |
1/8" NPT |
| |
|
F=8mm |
FT-132-480 |
.480" |
5/8" |
| |
|
|
B=32mm |
|
|
| |
|
|
F=10mm |
|
|
|
|