TE Short super rigid stubby tool holder for CNC machines

TE holders feature the minimum gauge length possible in order to provide maximum ridigity while cutting. They also provide added Z clearance, and are used with standard ER collets.

Most Rigid Collet Chuck on the Market!

• Balanced to 25,000 RPM at G2.5

• .0001" runout from taper to pocket

• Taper ground to AT3 standard

TE length compared to standard ER tool holder

ER collet chucks handle a wide range of machining jobs without having to buy new tool holders. Simply choose the right size collet for the job, set tool depth, and tighten the collet nut and pull stud to the proper torque using a torque wrench and tightening fixure.

Refer to the chart below to order CAT 50 ER collet chuck tool holders.

TE Short, Super Rigid ER Collet Chuck

Click on part number link to download the CAD file.

Part No.
Description
L1
Collet
Max. Shank
Wrench
TE-22253S CAT 40 x ER 32
28mm
ER32
3/4" or 20mm
894-36
TE-22311S CAT 50 x ER 32
28mm
ER32
3/4" or 20mm
894-36
TE-06177S BT 40 x ER 32
36mm
ER32
3/4" or 20mm
894-36
TE-22HN Hex style replacement nut