Slim Line holders are great for finish passes where small nose diameter tooling is required.
Click HERE to learn more about Shrink Fit tooling
Refer to the chart below to order HSK63A Slim Line tool holders.
|
Slim Line Features
• Smaller nose diameters than standard
• Balanced to 25,000 RPM at G2.5
• Maximum T.I.R. only .0001"
SlimLINE (left) .37 nose O.D. – Standard Shrink Fit .63" nose O.D. |
HSK 63A Slim Line toolholders
Part No. |
Description |
d1 |
d2 |
d3 |
I1 |
I2 |
|
HSK 63A x 1/8" I.D. - 80mm Slim Line |
1/8" |
.44" |
.63" |
80mm |
20mm |
|
HSK 63A x 3/16" I.D. - 80mm Slim Line |
3/16" |
.5" |
.69" |
80mm |
20mm |
|
HSK 63A x 1/4" I.D. - 80mm Slim Line |
1/4" |
.56" |
.81" |
80mm |
36mm |
|
HSK 63A x 3/8" I.D. - 80mm Slim Line |
3/8" |
.69" |
.94" |
80mm |
47mm |
|
HSK 63A x 1/2" I.D. - 80mm Slim Line |
1/2" |
.81" |
1.06" |
80mm |
47mm |
|
|
