DNA 16 Dead Nuts Accurate Collets

 

Techniks offers a variety of DNA 16 Collet Nuts, featuring PowerCOAT for 75% more holding power!

For best results always use a PowerCOAT nut, tightened to proper specification using an accurate torque wrench.

Features

  • .0002" T.I.R. extends tool life & reduces costs
  • Best collet for tools 1/8: (6mm) and smaller
  • Higher rigidity & holding power than standard ER holders
DNA collets hold shanks tighter
Part No. Shank Size inch/mm Range inch/mm
05954-0.3 .2 - .3mm .007" - .011" / .10mm
05954-0.4 1/64" / .3 - .4mm .011" - .015" / .10mm
05954-0.5  .4 - .5mm .015" -.019" / .10mm
05954-0.6 .5 - .6mm .019" - .023" / .10mm
05954-0.8 1/32" / .7 - .8mm .027" - .031" / .10mm
05954-1.0 .9 - 1.0mm .035" - .039" / .10mm
05954-1.2 3/64" / 1.1 - 1.2mm .043" - .047" / .10mm
05954-1.25 1.0 - 1.25mm .039" - .049" / .25mm
05954-1.5  1.25 - 1.5mm .049" - .059" / .25mm
05954-1.75 1/16" / 1.5 - 1.75mm .059" - .068" / .25mm
05954-02 5/64" / 1.75 - 2mm .068" - .078" / .25mm
05954-2.25 2 - 2.25mm .078" - .088" / .25mm
05954-2.5 3/32" / 2.25 - 2.5mm .088" - .098" / .25mm
05954-03 2.5 - 3mm .098" - .118" / .5mm
05954-3.5 1/8" / 3 - 3.5mm .118" -.138" / .5mm
05954-04 5/32" / 3.5 - 4mm .137" - .157" / .5mm
05954-4.5 4 - 4.5mm .157" - .177" / .5mm
05954-05 3/16" / 4 - 5mm .157" - .197" / .25mm
05954-06 7/32" / 5 - 6mm .196" - .236" / 1.0mm
05954-07 1/4" / 6 - 7mm .236" - .275" / 1.0mm
05954-08 5/16" / 7 - 8mm .275" - .314" / 1.0mm
05954-09 11/32" / 8 - 9mm .314" - .354" / 1.0mm
05954-10 3/8" / 9 - 10mm .354" - .392" / 1.0mm
05954-1/8  exact size collet: 1/8" .105" - .125" / .5mm
05954-3/16  exact size collet: 3/16" .147" - .187" / 1.0mm
05954-1/4  exact size collet: 1/4" .210" - .25" / 1.0mm
05954-3/8  exact size collet: 3/8" .335 - .375" / 1.0mm