Slim-Fit CAT 40 & 50 Tool Holders

Slim-Fit CAT tool holder SBL6

Techniks Certified for accuracy and balance.
Each holder comes with a complete lab report

Internal drawbar collet eliminates need for clamping nut to permit narrow nose diameter.

Features

  • Maximum T.I.R. 0.0001" from taper to collet pocket
  • Balanced to 25,000 RPM at G2.5
  • Narrow nose for excellent clearance

Use SBL6 Slim-Fit Holders for shank sizes 5/32" to 1/8". Find SlimFIT collets here. Order extensions for additional length.

For best results set tool depth, and tighten the pull stud to the proper torque using a torque wrench and tightening fixure.

Click Slim-Fit to find out more.

Coolant-thru toolholder
Maximum nose clearance

SlimFIT CAT 40 Toolholders

Part No.
Description
L1
d2
T
Collet Series
Drawbar-T
23654
CAT 40 x SBL6-3"
3"
0.56"
M6 x 1.0P
18743
SYIC-SBL-M6C-60
23656
CAT 40 x SBL6-4"
4"
0.56"
M6 x 1.0P
18743
SYIC-SBL-M6C-35
23658
CAT 40 x SBL6-6"
6"
0.56"
M6 x 1.0P
18743
SYIC-SBL-M6C-80
23659
CAT 40 x SBL6-8"
8"
0.56"
M6 x 1.0P
18743
SYIC-SBL-M6C-130

SlimFIT CAT 50 Toolholders

Part No.
Description
L1
d2
T
Collet Series
Drawbar-T
23672
CAT 50 x SBL6-3.5"
3.5"
0.56"
M6 x 1.0P
18743
SYIC-SBL-M6C-65
23676
CAT 50 x SBL6-6"
6"
0.56"
M6 x 1.0P
18743
SYIC-SBL-M6C-80

SlimFIT Collets (Tighten to 9 ft/lbs)

Part No.
Description
18851-3/32 SlimFIT 6 - 3/32" collet
18851-7/64 SlimFIT 6 - 7/64" collet
18851-1/8 SlimFIT 6 - 1/8" collet
18851-9/64 SlimFIT 6 - 9/64" collet
18851-5/32 SlimFIT 6 - 5/32" collet
18851-11/64 SlimFIT 6 - 11/64" collet
18851-3/16 SlimFIT 6 - 3/16" collet
18851-13/64 SlimFIT 6 - 13/64" collet
18851-7/32 SlimFIT 6 - 7/32" collet
18851-15/64 SlimFIT 6 - 15/64" collet
18851-1/4 SlimFIT 6 - 1/4" collet
18851-03 SlimFIT 6 - 3mm collet
18851-04 SlimFIT 6 - 4mm collet
18851-05 SlimFIT 6 - 5mm collet
18851-05.5 SlimFIT 6 - 5.5mm collet
18851-06 SlimFIT 6 - 6mm collet