CAT40 SlimLINE ShrinkFIT Holders

Slim Line toolholders

Techniks Certified for accuracy and balance.
Each holder comes with a complete lab report


SlimLINE Features

  • Smaller nose diameter (d2)
  • Maximum T.I.R. only .0001"
  • Balanced to 25,000 RPM at G2.5

SlimLINE holders are great for finish passes where small nose diameter tooling is required.

SlimLINE .37" nose O.D. – Standard ShrinkFIT .63" nose O.D.

Click HERE to learn more about ShrinkFIT tooling

CAT40 SlimLINE ShrinkFIT Toolholders Inch Sizes

Refer to the chart below to order CAT 40 SlimLINE ShrinkFIT holders.

Part No.
Description
d1
d2
d3
I1
I2
thread
coolant screw
CAT40 x 1/8" I.D. - 3.15" SlimLINE
1/8"
..35"
.60"
3.15"
.78"
M6 x 1.0P
16081C-20
CAT40 x 3/16" I.D. - 3.15" SlimLINE
3/16"
.43"
.68"
3.15"
.78"
M6 x 1.0P
16081C-20
CAT40 x 1/4" I.D. - 3.15" SlimLINE
1/4"
.47"
.72"
3.15"
1.42"
M5 x 0.8P
16080C-20
CAT40 x 3/8" I.D. - 3.15" SlimLINE
3/8"
.63"
.88"
3.15"
1.93"
M8 x 1.25P
16082C-20
CAT40 x 1/2" I.D. - 3.15" SlimLINE
1/2"
.70"
.96"
3.15"
1.93"
M10 x 1.5P
16083C-20

CAT40 SlimLINE ShrinkFIT Toolholders Metric Sizes

Part No.
Description
d1
d2
d3
I1
I2
thread
coolant screw
29103
CAT40 x 3mm I.D. - 80mm SlimLINE
3mm
9mm
15.5mm
80mm
45mm
M6 x 1.0P
16081C-20
29104
CAT40 x 4mm I.D. - 80mm SlimLINE
4mm
10mm
16.3mm
80mm
45mm
M6 x 1.0P
16081C-20
29106
CAT40 x 6mm I.D. - 80mm SlimLINE
6mm
12mm
18.3mm
80mm
45mm
M5 x 0.8P
16080C-20