Slim-Fit BT 30 & 40 Tool Holders

BT 30 slim fit tool holder for CNC machines

Techniks Certified for accuracy and balance.
Each holder comes with a complete lab report

Internal drawbar collet eliminates need for clamping nut to permit narrow nose diameter.

Powerful Drawbar Design

  • Great accuracy at extended lengths
  • Balanced to 25,000 RPM at G2.5
  • Narrow nose for excellent clearance

Use SBL6 Slim-Fit Holders for shank sizes 5/32" to 1/8". Find SlimFIT collets here. Order extensions for additional length.

For best results set tool depth, and tighten the pull stud to the proper torque using a torque wrench and tightening fixure.

Click Slim-Fit to find out more.

Coolant-thru toolholder
Maximum nose clearance

Slim-Fit BT30 Tool Holders

Refer to the chart below to order BT Slim-Fit tool holders.
Part No.
Description
L1
T
Collet Series
Drawbar-T
18854
BT 30 X SBL6-70
70mm
M6 x 1.0P
18743
SYIC-SBL-M6C-45
18856
BT 30 X SBL6-100
100mm
M6 x 1.0P
18743
SYIC-SBL-M6C-65

Slim-Fit BT40 Tool Holders

Part No.
Description
L1
T
Collet Series
Drawbar-T
18866
BT 40 X SBL6-70
70mm
M6 x 1.0P
18743
SYIC-SBL-M6C-45
18868
BT 40 X SBL6-100
100mm
M6 x 1.0P
18743
SYIC-SBL-M6C-80
18868-150 BT40 x SBL6-150 150mm - 18743 SYIC-SBL-M6C-65
18869 BT40 x SBL6-200 200mm - 18743 SYIC-SBL-M6C-130

SlimFIT Collets (Tighten to 9 ft/lbs)

Part No.
Description
18851-3/32 SlimFIT 6 - 3/32" collet
18851-7/64 SlimFIT 6 - 7/64" collet
18851-1/8 SlimFIT 6 - 1/8" collet
18851-9/64 SlimFIT 6 - 9/64" collet
18851-5/32 SlimFIT 6 - 5/32" collet
18851-11/64 SlimFIT 6 - 11/64" collet
18851-3/16 SlimFIT 6 - 3/16" collet
18851-13/64 SlimFIT 6 - 13/64" collet
18851-7/32 SlimFIT 6 - 7/32" collet
18851-15/64 SlimFIT 6 - 15/64" collet
18851-1/4 SlimFIT 6 - 1/4" collet
18851-03 SlimFIT 6 - 3mm collet
18851-04 SlimFIT 6 - 4mm collet
18851-05 SlimFIT 6 - 5mm collet
18851-05.5 SlimFIT 6 - 5.5mm collet
18851-06 SlimFIT 6 - 6mm collet