EET-WL Fine Pole Lengthwise

For surface grinding workholding applications


  • EDM-READY: fully submersible, brass sealed
    (More than 1000MΩ of insulation resistance)
  • Hard soldered top plate and solid bottom plate for maximum rigidity and accuracy
  • Low-profile design increases Z-axis stroke
  • Strong magnetic force regulated by controller
  • Controller demagnetizes workpiece


EET-W chucks thicker bottom plate provides extremely strong magnetic workholding.
Click HERE for magnetic chuck controllers

Model L x W x H Face Plate Pole Pitch Current Wt.
(inches) B L1 Be Amp/DCV
EET-1530WL 6 x 12 x 4 150 300 125 4(1+3) 0.39/90
EET-1535WL 6 x 14 x 4 150 350 125 4(1+3) 0.52/90
EET-1545WL 6 x 18 x 4 150 450 125 4(1+3) 0.60/90
EET-2040WL 8 x 16 x 4 200 400 173 4(1+3) 0.69/90
EET-2045WL 8 x 18 x 4 200 450 173 4(1+3) 0.90/90
EET-2050WL 8 x 20 x 4 200 500 173 4(1+3) 1.01/90
EET-2060WL 8 x 24 x 4 200 600 173 4(1+3) 1.31/90
EET-2540WL 10 x 16 x 4 250 400 225 4(1+3) 1.00/90
EET-2545WL 10 x 18 x 4 250 450 225 4(1+3) 1.10/90
EET-2550WL 10 x 20 x 4 250 500 225 4(1+3) 1.33/90
EET-3060WL 12 x 24 x 4 300 600 273 4(1+3) 1.52/90

25.4mm = 1”

 

 

Fine Pole:

Fine pole design provides best
holding power on workpieces
over 2mm thick.