Micro Deburring Equipment
The sPINner performs batch deburring on small, precision parts like these without the need for hand deburring …in minutes!
If you're hand deburring parts like these, you should click on the photo above to watch a short movie that demonstrates how the sPINner deburring machine technology works.
Send us your parts for a free micro deburring analysis!
Call (877) 354-3837 for details.
The sPINner deburring machine works best on small, precision parts, made from non-ferrous metals including: aluminum, brass, copper, stainless steel, and titanium. The deburring process will not affect tolerances or damage delicate parts.
The sPINner micro deburring process is used in many industries including medical, aerospace, and electronics. It is also a good fit for most parts made on CNC Swiss-type screw machines.
sPINner Micro Deburring Machines
|Model No.||Dim. L x W x H||Tank Size L x W||Power||Amps||Weight|
|EHD-716||11" x 9" x 12"||6" x 6"||110V||2||35 lbs.|
|EDH-728||19" x 19" x 37"||11" x 11"||220V||5||160 lbs.|
|EHD-735||23" x 26" x 34"||15" x 16"||220V||10||220 lbs.|
|EHD-750||29" x 30" x 36"||21" x 23"||220V||15||385 lbs.|
All power requirements are single phase.
Standard accessories include: 2 deburring containers, 1 separating container, and 1 manual.
Media and deburring machine solution sold separately.
Stainless Steel Pin Media (SUS 304 with magnetic treatment)
This special stainless steel media is hardened to HRC 30, and will last for years in most applications. To deburr hard materials like stainless steel, steel, etc., use a diameter of media bigger than 0.5mm. Use sizes less than 0.5mm for soft material like brass, copper, aluminum, gold, etc. Choose larger pins for harder material and/or to increase deburring machine's power.
If you want to deburr small holes, choose a diameter of pin media that is smaller than the hole. 3mm length media will work better for small holes and crevices.
|Standard Dimension Media (diameter x length in millimeters)|
|Special Dimension Media (diameter x length in millimeters)|
Deburring Machine Solution
Used with all types of materials. Dilute to a 50:1 ratio with water. Other solutions may be used. Call for recommendations.
|PFS-747||1/2 gallon deburring machine solution|
Small Parts Deburring Machine
Micro Deburring Machine Model EHD-728
Works great on medical parts!
Fast and easy to operate
- Cover bottom of pail with media
- Add parts side-by-side
- Add deburring machine solution until parts and media are covered by 1/4"
- Program speed and time and "Start"
- Strain media from parts when cycle finishes.
Eliminate hand deburring with the precision sPINner micro deburring equipment!
Micro deburring will not affect tolerances or damage delicate parts.