MagVISE EET Surface Grinding Chucks


Click for Induction Blocks.

EET (Wide Spaced Pole Design)

Wider spacing magnetic poles for general surface grinding of both thick and thin workpieces.

  • Brass welded faceplate can be machined if needed, and protects the magnetic system from penetration of coolant.
  • More than 1,000 OHMs resistance.
  • Low-profile design increases Z-axis stroke.
  • Housing and bottom plate are free of magnetism —
    will not magnetize machine bed or bearings.

 

Model Pole Pitch (P) L x W x H Volts Amps Weight
EET-1530 15 (3+12) 12" x 6" x 3" DC90V 0.18 44 lbs.
EET-1535 15 (3+12) 14" x 6" x 3" DC90V 0.19 53 lbs.
EET-1545 15 (3+12) 18" x 6" x 3" DC90V 0.19 66 lbs.
EET-2040 15 (3+12) 16" x 8" x 3" DC90V 0.28 84 lbs.
EET-2045 15 (3+12) 18" x 8" x 3" DC90V 0.28 90 lbs.
EET-2050 15 (3+12) 20" x 8" x 3" DC90V 0.36 99 lbs.
EET-2550 15 (3+12) 20" x 10" x 3" DC90V 0.46 143 lbs.
EET-3060 15 (3+12) 24" x 12" x 3" DC90V 0.86 179 lbs.
EET-3070 15 (3+12) 28" x 12" x 3" DC90V 0.81 205 lbs.
EET-3090 15 (3+12) 35" x 12" x 3" DC90V 1.05 276 lbs.
EET-4060 19 (3+16) 24" x 16" x 3.5" DC90V 0.95 287 lbs.
EET-4070 19 (3+16) 28" x 16" x 3.5" DC90V 1.21 333 lbs.
EET-4080 19 (3+16) 32" x 16" x 3.5" DC90V 1.31 384 lbs.
EET-40100 19 (3+16) 40" x 16" x 3.5" DC90V 1.33 487 lbs.
EET-50100 19 (3+16) 40" x 20" x 3.5" DC90V 1.46 595 lbs.
EET-50150 19 (3+16) 60" x 20" x 3.5" DC90V 3.37 893 lbs.
EET-60100 19 (3+16) 40" x 24" x 3.5" DC90V 2.8 728 lbs.
EET-60150 19 (3+16) 60" x 24" x 3.5" DC90V 2.85 1091 lbs.
EET-80100 19 (3+16) 40" x 32" x 3.5" DC90V 3.8 970 lbs.