EEPM-D 70mm Chucks

For Large Workpieces

Our 70MM pole chucks provide the increased holding power needed for large workpieces, thick plates, blocks and molds. They are a great choice for drilling, milling, and boring operations on either vertical or horizontal mills. They easily integrate with pallet changing and tombstone systems.

Features:

  • Up to 98,767 lbs. holding power
  • Reduce setup time by 50%
  • Machine freely on 5-sides

Holding Warped Material

Use induction blocks to raise the workpiece above the surface of the magnet and permit machining 5 sides and thru hole drilling. Individual induction blocks provide maximum flexibility for creating custom setups for holding difficult workpieces and warped stock.

Download our PDF for thick & thin workpieces.

Model Face (L x W x H) Poles Holding Power Subplate Power Controller Weight
EEPM-3060D-480 26.4" x 13.4" x 2.8" 18 27,778  lbs. EEPM-3060DISP 30A (380-440V) EEPM-C1 278 lbs.
EEPM-4050D-480 20.9" x 16.9" x 2.8" 20 30,864 lbs. EEPM-4050DISP 32A (380-440V) EEPM-C1 278 lbs.
EEPM-4060D-480 26.4" x 16.9" x 2.8" 24 37,037 lbs. EEPM-4060DISP 36A (380-440V) EEPM-C1 350 lbs.
EEPM-4080D-480 33.5" x 16.9" x 2.8" 32 49,383 lbs. EEPM-4080DISP 28A (380-440V) EEPM-C2 445 lbs.
EEPM-5060D-480 26.4" x 20.5" x 2.8" 30 46,297 lbs. EEPM-5060DISP 24A (380-440V) EEPM-C2 425 lbs.
EEPM-5080D-480 33.5" x 20.5" x 2.8" 40 61,729 lbs. EEPM-5080DISP 24A (380-440V) EEPM-C2 538 lbs.
EEPM-6060D-480 26.4" x 26.0" x 2.8" 36 55,556 lbs. EEPM-6060DISP 32A (380-440V) EEPM-C2 540 lbs.
EEPM-6080D-480 33.5" x 26.0" x 2.8" 48 74,075 lbs. EEPM-6080DISP 36A (380-440V) EEPM-C2 683 lbs.
EEPM-8080D-480 33.5" x 33.1" x 2.8" 64 98,767 lbs. EEPM-8080DISP 28A (380-440V) EEPM-C4 870 lbs.