MagVISE EEPM-CIRS Products for Machining & Grinding

For workholding of ferrous materials only.

Advantages:

  • Versatile round chucks for many different applicatons
  • Reduce setup & part change-over time by 50% or more!
  • Machine freely on 5-sides so you can cut the full part profile in only 1 operation

 

There are 9 stock sizes of EEPM-CIRS chucks to choose from (see table below). We also can build custom chucks for your machine.
     We recommend using induction blocks at all times to preserve the precison ground finish and prevent damage to the face of the chuck. You can easily modify induction blocks to your part requirements. Use EEPM-SP induction blocks for holding warped stock.

Use induction blocks as workstops to hold hard parts

Machine nests to hold
smaller parts

Machine full 5 sides using induction blocks

Gang parts together on larger chucks for efficiency

Honing application

Easy integration with 5-axis tables
Model Dim. (O.D. x H) No. Poles Holding Power Weight Control
EEPM-CIRS200 7.99" x 2.75" 4 2,204 lbs. 35 lbs. C1
EEPM-CIRS300 12.0" x 2.75" 12 6,612 lbs. 77 lbs. C1
EEPM-CIRS500 19.68" x 2.75" 32 17,632 lbs. 214 lbs. C1
EEPM-CIRS600 24.4" x 2.75" 52 28,652 lbs. 330 lbs. C2
EEPM-CIRS700 27.55" x 2.75" 76 41,876 lbs. 421 lbs. C4
EEPM-CIRS800 32.28" x 2.75" 96 52,896 lbs. 578 lbs. C4
EEPM-CIRS900 35.82" x 3.14" 120 66,120 lbs. 798 lbs. C4
EEPM-CIRS1000 40.15" x 3.14" 164 90,364 lbs. 1,022 lbs. C8
EEPM-CIRS1100 45.54" x 3.14" 204 112,404 lbs. 1,203 lbs. C8

EEPM chucks include controller and remote. Control requires a dedicated 480V single phase, 30A power supply.