MagVISE EDTW Fine Pole Surface Grinding Chucks


Click for Induction Blocks.

EDTW (MicroPITCH Fine Pole Design)

Fine pole design provides best holding power for surface grinding of small or thinworkpieces.

  • Brass welded faceplate can be machined if needed, and protects the magnetic system from penetration of coolant.
  • Powerful Rare Earth Neodymium Iron Boron magnets are 5 times stronger than other magnets
  • Needs no electricity. Provides a constant source of workholding power.
  • Low-profile design increases Z-axis stroke
  • Housing and bottom plate are free of magnetism —
    will not magnetize machine bed or bearings.

Model Pole Pitch (P) L x W x H Weight
EDTW-1018 2 (1+1) 7" x 4" x 2" 15 lbs.
EDTW-1325 2 (1+1) 10" x 5" x 2.25" 29 lbs.
EDTW-1515 2 (1+1) 6" x 6" x 2.25" 20 lbs.
EDTW-1530 2 (1+1) 12" x 6" x 2.5" 49 lbs.
EDTW-1535 2 (1+1) 14" x 6" x 2.5" 53 lbs.
EDTW-1545 2 (1+1) 18" x 6" x 2.5" 68 lbs.
EDTW-2040 2 (1+1) 16" x 8" x 2.5" 82 lbs.
EDTW-2045 2 (1+1) 18" x 8" x 2.5" 90 lbs.
EDTW-2050 2 (1+1) 20" x 8" x 2.5" 99 lbs.
EDTW-2550 2 (1+1) 20" x 10" x 2.5" 132 lbs.