MagVISE EDMT Surface Grinding Chucks


Click for Induction Blocks.

EDMT (All-Purpose Variable Pole Design)

Alternating thick/thin magnetic poles provides best holding power for both thick and thin workpieces.

  • EDM-READY: fully submersible, brass welded faceplate which can be machined if needed, and protects the magnetic system from penetration of coolant.
  • Powerful Rare Earth Neodymium Iron Boron magnets are 5 times stronger than other magnets
  • Needs no electricity. Provides a constant source of workholding power.
  • Low-profile design increases Z-axis stroke
  • Housing and bottom plate are free of magnetism —will not magnetize machine bed or bearings.

Model Pole Pitch (P) L x W x H Weight
EDMT-1018 11.2 (1.6+2+1.6+6) 7" x 4" x 2.5" 16 lbs.
EDMT-1325 11.2 (1.6+2+1.6+6) 10" x 5" x 2.5" 23 lbs.
EDMT-1530 11.2 (1.6+2+1.6+6) 12" x 6" x 2.5" 33 lbs.
EDMT-1535 11.2 (1.6+2+1.6+6) 14" x 6" x 2.5" 38 lbs.
EDMT-1545 11.2 (1.6+2+1.6+6) 18" x 6" x 2.5" 44 lbs.
EDMT-2040 11.2 (1.6+2+1.6+6) 16" x 8" x 2.5" 57 lbs.
EDMT-2045 11.2 (1.6+2+1.6+6) 18" x 8" x 2.5" 66 lbs.
EDMT-2050 11.2 (1.6+2+1.6+6) 20" x 8" x 2.5" 79 lbs.
EDMT-2550 4 + 12 20" x 10" x 2.5" 130 lbs.
EDMT-3060 3 + 15 24" x 12" x 2.5" 198 lbs.