|
|
 |
Slim-Fit 6 collets are designed for use with OLP extensions and SBL6 chucks. |
|
|
|
||
| Slim design reaches into tight spots. Use OLP extensions with SBL6 chucks for best reach. | ||
| Slim-Fit OLP Collet Holder Extensions | Slim-Fit Standard Collets |
| Part No. | Description | L | l1 | C | d2 | T | Part No. | Description | |
| 05140 | 1/2" x OLP6 - 5" | 5" | 1.89" | .50" | .472" | M6 x 1.0P | 18743-7/64 | Slim Fit 6 - 7/64" collet | |
| 05142 | 1/2" x OLP6 - 6" | 6" | 1.89" | .50" | .472" | M6 x 1.0P | 18743-1/8 | Slim Fit 6 - 1/8" collet | |
| 05146 | 5/8" x OLP6 - 5" | 5" | 1.89" | .625" | .472" | M6 x 1.0P | 18743-9/64 | Slim Fit 6 - 9/64" collet | |
| 05148 | 5/8" x OLP6 - 6" | 6" | 1.89" | .625" | .472" | M6 x 1.0P | 18743-5/32 | Slim Fit 6 - 5/32" collet | |
| 05150 | 5/8" x OLP6 - 8" | 8" | 1.89" | .625" | .472" | M6 x 1.0P | 18743-11/64 | Slim Fit 6 - 11/64" collet | |
| 18743-3/16 | Slim Fit 6 - 3/16" collet | ||||||||
| You will need a 1/2" Slim-Fit 20 collet for 1/2" diameter OLP extensions and a 5/8" Slim-fit 20 collet for 5/8" OLP extensions. Extensions use a 5mm hex wrench to turn the draw bar. | 18743-13/64 | Slim Fit 6 - 13/64" collet | |||||||
| 18743-15/64 | Slim Fit 6 -15/64" collet | ||||||||
| 18743-1/4 | Slim Fit 6 - 1/4" collet | ||||||||
| 18743-03 | Slim Fit 6 - 3mm collet | ||||||||
| 18743-04 | Slim Fit 6 - 4mm collet | ||||||||
| 18743-05 | Slim Fit 6 - 5mm collet | ||||||||
| 18743-06 | Slim Fit 6 - 6mm collet | ||||||||